操作步驟 OPERATION STEPS
1、把所有配件正確連接起來,并保證已經密封;(注:吸油膠管自備)
2、接上電源,啟動電機;
3、打開加油槍進行給加油容器加油;
4、加油完畢,掛上油槍即完成一次加油。
1. Connect all the parts in properly, ensure it’s well sealing; (Note: Hose shall be provided by yourself)
2. Connect with the mains to start dynamo;
3. Open the nozzle to add oil;
4. Hang on the nozzle, means a refueling is completed.
注意事項 ATTENTION
1、上次加油完畢要進行下次加油時,請將上次計數歸零;
2、使用的液體燃點不能超過55℃;
3、不能空轉;
4、過濾網必須進行定期清理。
1. When for the next refueling, please make sure that the data displayed in zero;
2. The ignition point shall be not exceed 55 ℃;
3. Running empty is not allowed;
4. Filter must be cleaned in regulat.
常見故障維修 TECHNICAL SPECIFICATION